From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Renaud Barbier <renaud.barbier@abaco.com>, barebox@lists.infradead.org
Subject: Re: [PATCH 1/4] ARM: atomic.h: add 64-bit counter support
Date: Thu, 29 Jul 2021 11:58:18 +0200 [thread overview]
Message-ID: <138a77fb-5f88-3a94-1385-4adb743f91a7@pengutronix.de> (raw)
In-Reply-To: <1627476428-16318-2-git-send-email-renaud.barbier@abaco.com>
On 28.07.21 14:47, Renaud Barbier wrote:
> In preparation for the introduction of the FSL IFC nand driver
> for the layerscape CPU, add 64-bit counter support.
>
> Signed-off-by: Renaud Barbier <renaud.barbier@abaco.com>
> ---
> include/asm-generic/atomic-long.h | 3 +-
> include/asm-generic/atomic.h | 49 +++++++++++++++++++++++++++++++
> 2 files changed, 51 insertions(+), 1 deletion(-)
>
> diff --git a/include/asm-generic/atomic-long.h b/include/asm-generic/atomic-long.h
> index 322d510f38..dbb503e758 100644
> --- a/include/asm-generic/atomic-long.h
> +++ b/include/asm-generic/atomic-long.h
> @@ -65,7 +65,7 @@ static inline void atomic_long_sub(long i, atomic_long_t *l)
>
> atomic64_sub(i, v);
> }
> -
> +#if 0
> static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
> {
> atomic64_t *v = (atomic64_t *)l;
> @@ -128,6 +128,7 @@ static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
>
> return (long)atomic64_add_unless(v, a, u);
> }
> +#endif
Why comment these out?
>
> #define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
>
> diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
> index 449cecaabc..6e63b8e8e7 100644
> --- a/include/asm-generic/atomic.h
> +++ b/include/asm-generic/atomic.h
> @@ -11,7 +11,55 @@
> #ifdef CONFIG_SMP
> #error SMP not supported
> #endif
> +#define ATOMIC_INIT(i) { (i) }
> +
> +#ifdef CONFIG_64BIT
> +typedef struct { s64 counter; } atomic64_t;
> +
> +#define atomic64_read(v) ((v)->counter)
> +#define atomic64_set(v, i) (((v)->counter) = (i))
> +
> +static inline void atomic64_add(s64 i, volatile atomic64_t *v)
> +{
> + v->counter += i;
> +}
> +
> +static inline void atomic64_sub(s64 i, volatile atomic64_t *v)
> +{
> + v->counter -= i;
> +}
> +
> +static inline void atomic64_inc(volatile atomic64_t *v)
> +{
> + v->counter += 1;
> +}
> +
> +static inline void atomic64_dec(volatile atomic64_t *v)
> +{
> + v->counter -= 1;
> +}
> +
> +static inline int atomic64_dec_and_test(volatile atomic64_t *v)
> +{
> + s64 val;
> +
> + val = v->counter;
> + v->counter = val -= 1;
> +
> + return val == 0;
> +}
>
> +static inline int atomic64_add_negative(s64 i, volatile atomic64_t *v)
> +{
> + s64 val;
> +
> + val = v->counter;
> + v->counter = val += i;
> +
> + return val < 0;
> +}
> +
> +#else
> typedef struct { volatile int counter; } atomic_t;
>
> #define ATOMIC_INIT(i) { (i) }
> @@ -63,6 +111,7 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
> {
> *addr &= ~mask;
> }
> +#endif
>
> /* Atomic operations are already serializing on ARM */
> #define smp_mb__before_atomic_dec() barrier()
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-07-29 9:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 12:47 [PATCH 0/4] NXP IFC nand driver Renaud Barbier
2021-07-28 12:47 ` [PATCH 1/4] ARM: atomic.h: add 64-bit counter support Renaud Barbier
2021-07-29 9:58 ` Ahmad Fatoum [this message]
2021-07-28 12:47 ` [PATCH 2/4] arm: 64-bit device specific operation Renaud Barbier
2021-07-29 10:00 ` Ahmad Fatoum
2021-07-28 12:47 ` [PATCH 3/4] nand: add NXP IFC nand driver Renaud Barbier
2021-07-29 10:11 ` Ahmad Fatoum
2021-07-28 12:47 ` [PATCH 4/4] ls1046ardb: enable IFC NAND Renaud Barbier
2021-07-29 10:13 ` Ahmad Fatoum
2021-07-29 18:19 ` Barbier, Renaud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=138a77fb-5f88-3a94-1385-4adb743f91a7@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=renaud.barbier@abaco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox