From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Renaud Barbier <renaud.barbier@abaco.com>, barebox@lists.infradead.org
Subject: Re: [PATCH 4/4] ls1046ardb: enable IFC NAND.
Date: Thu, 29 Jul 2021 12:13:56 +0200 [thread overview]
Message-ID: <83f012a3-a035-2d4c-e5b9-a1719914de76@pengutronix.de> (raw)
In-Reply-To: <1627476428-16318-5-git-send-email-renaud.barbier@abaco.com>
Hi,
On 28.07.21 14:47, Renaud Barbier wrote:
> Set the NAND timings and enable the IFC NAND driver.
>
> Signed-off-by: Renaud Barbier <renaud.barbier@abaco.com>
> ---
> arch/arm/boards/ls1046ardb/board.c | 26 ++++++++++++++++++++++++++
> arch/arm/configs/layerscape_defconfig | 12 ++++++++++++
> 2 files changed, 38 insertions(+)
>
> diff --git a/arch/arm/boards/ls1046ardb/board.c b/arch/arm/boards/ls1046ardb/board.c
> index ef68e9c7f9..5573d5b486 100644
> --- a/arch/arm/boards/ls1046ardb/board.c
> +++ b/arch/arm/boards/ls1046ardb/board.c
> @@ -12,6 +12,7 @@
> #include <linux/sizes.h>
> #include <linux/clk.h>
> #include <linux/clkdev.h>
> +#include <linux/fsl_ifc.h>
> #include <asm/system.h>
> #include <mach/layerscape.h>
> #include <mach/bbu.h>
> @@ -147,6 +148,31 @@ static int rdb_mem_init(void)
> }
> mem_initcall(rdb_mem_init);
>
> +static int rdb_nand_init(void)
> +{
You should check against board compatible here.
> + /* NAND mapping and timings. Only for Linux use. */
Why is this only for Linux use? You use the driver in barebox, don't you?
> + set_ifc_cspr(IFC_CS0, CSPR_PHYS_ADDR(0x7e800000) | CSPR_PORT_SIZE_8 |
> + CSPR_MSEL_NAND | CSPR_V);
> + set_ifc_csor(IFC_CS0, CSOR_NAND_ECC_ENC_EN | CSOR_NAND_ECC_DEC_EN |
> + CSOR_NAND_ECC_MODE_8 |
> + CSOR_NAND_RAL_3 | CSOR_NAND_PGS_4K |
> + CSOR_NAND_SPRZ_224 | CSOR_NAND_PB(64) |
> + CSOR_NAND_TRHZ_20);
> + set_ifc_amask(IFC_CS0, IFC_AMASK(64*1024));
> + set_ifc_ftim(IFC_CS0, IFC_FTIM0, FTIM0_NAND_TCCST(0x07) |
> + FTIM0_NAND_TWP(0x18) | FTIM0_NAND_TWCHT(0x07) |
> + FTIM0_NAND_TWH(0x0a));
> + set_ifc_ftim(IFC_CS0, IFC_FTIM1, FTIM1_NAND_TADLE(0x32) |
> + FTIM1_NAND_TWBE(0x39) | FTIM1_NAND_TRR(0x0e)|
> + FTIM1_NAND_TRP(0x18));
> + set_ifc_ftim(IFC_CS0, IFC_FTIM2, FTIM2_NAND_TRAD(0xf) |
> + FTIM2_NAND_TREH(0xa) | FTIM2_NAND_TWHRE(0x1e));
> + set_ifc_ftim(IFC_CS0, IFC_FTIM3, 0);
I assume there are no DT bindings describing these parameters for the
IFC driver to consume?
> +
> + return 0;
> +}
> +core_initcall(rdb_nand_init);
Cheers,
Ahmad
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-07-29 10:15 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 12:47 [PATCH 0/4] NXP IFC nand driver Renaud Barbier
2021-07-28 12:47 ` [PATCH 1/4] ARM: atomic.h: add 64-bit counter support Renaud Barbier
2021-07-29 9:58 ` Ahmad Fatoum
2021-07-28 12:47 ` [PATCH 2/4] arm: 64-bit device specific operation Renaud Barbier
2021-07-29 10:00 ` Ahmad Fatoum
2021-07-28 12:47 ` [PATCH 3/4] nand: add NXP IFC nand driver Renaud Barbier
2021-07-29 10:11 ` Ahmad Fatoum
2021-07-28 12:47 ` [PATCH 4/4] ls1046ardb: enable IFC NAND Renaud Barbier
2021-07-29 10:13 ` Ahmad Fatoum [this message]
2021-07-29 18:19 ` Barbier, Renaud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=83f012a3-a035-2d4c-e5b9-a1719914de76@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=renaud.barbier@abaco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox