mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 18/19] ARM: i.MX Phytec physom: Add deep-probe support
Date: Fri, 25 Jun 2021 09:25:39 +0200	[thread overview]
Message-ID: <20210625072540.32717-19-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20210625072540.32717-1-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/phytec-som-imx6/board.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boards/phytec-som-imx6/board.c b/arch/arm/boards/phytec-som-imx6/board.c
index 36c4d9a78b..1e515a093a 100644
--- a/arch/arm/boards/phytec-som-imx6/board.c
+++ b/arch/arm/boards/phytec-som-imx6/board.c
@@ -14,6 +14,7 @@
 #include <gpio.h>
 #include <init.h>
 #include <of.h>
+#include <deep-probe.h>
 #include <i2c/i2c.h>
 #include <mach/bbu.h>
 #include <platform_data/eth-fec.h>
@@ -110,6 +111,10 @@ static int phycore_da9062_setup_buck_mode(void)
 	if (!pmic_np)
 		return -ENODEV;
 
+	ret = of_device_ensure_probed(pmic_np);
+	if (ret)
+		return ret;
+
 	adapter = of_find_i2c_adapter_by_node(pmic_np->parent);
 	if (!adapter)
 		return -ENODEV;
@@ -161,6 +166,10 @@ static int physom_imx6_probe(struct device_d *dev)
 	unsigned flags = brd->flags;
 
 	if (flags & IS_PHYFLEX) {
+		ret = of_devices_ensure_probed_by_property("gpio-controller");
+		if (ret)
+			return ret;
+
 		phyflex_err006282_workaround();
 
 		pfla02_module_revision = get_module_rev();
@@ -358,3 +367,5 @@ static struct driver_d physom_imx6_driver = {
 };
 
 postcore_platform_driver(physom_imx6_driver);
+
+BAREBOX_DEEP_PROBE_ENABLE(physom_imx6_match);
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  parent reply	other threads:[~2021-06-25  7:47 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-25  7:25 [PATCH v6 00/19] barebox deep probe support Sascha Hauer
2021-06-25  7:25 ` [PATCH 01/19] imx53: remove unused imx53_add_nand Sascha Hauer
2021-06-25  7:25 ` [PATCH 02/19] of: platform: remove check of already added devices Sascha Hauer
2021-06-25  7:25 ` [PATCH 03/19] of: platform: Keep track of populated platform devices Sascha Hauer
2021-06-25  7:25 ` [PATCH 04/19] of: base: move memory init from DT to initcall Sascha Hauer
2021-06-25  7:25 ` [PATCH 05/19] of: base: move clock init from of_probe() to barebox_register_of() Sascha Hauer
2021-06-25  7:25 ` [PATCH 06/19] of: Set of_chosen and of_model earlier Sascha Hauer
2021-06-25  7:25 ` [PATCH 07/19] of: implement of_get_stdoutpath() Sascha Hauer
2021-06-25  7:25 ` [PATCH 08/19] initcall: add of_populate_initcall Sascha Hauer
2021-06-25  7:25 ` [PATCH 09/19] common: add initial barebox deep-probe support Sascha Hauer
2021-06-25  7:25 ` [PATCH 10/19] pinctrl: Find controller node first Sascha Hauer
2021-06-25  7:25 ` [PATCH 11/19] common: Explicitly probe consoles earlier with deep probe Sascha Hauer
2021-06-25  7:25 ` [PATCH 12/19] pinctrl: Add deep probe support Sascha Hauer
2021-06-25  7:25 ` [PATCH 13/19] phy: " Sascha Hauer
2021-06-25  7:25 ` [PATCH 14/19] ARM: i.MX: esdctl: add deep-probe support Sascha Hauer
2021-06-25  7:25 ` [PATCH 15/19] ARM: stm32mp: ddrctrl: " Sascha Hauer
2021-06-25  7:25 ` [PATCH 16/19] ARM: boards: mx6-sabrelite: " Sascha Hauer
2021-06-25  7:25 ` [PATCH 17/19] ARM: i.MX Phytec physom: convert to board driver Sascha Hauer
2021-06-25  7:25 ` Sascha Hauer [this message]
2021-06-25  7:25 ` [PATCH 19/19] of: Add dummy driver Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210625072540.32717-19-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox