[PATCH 6/6] mci: sdhci: rockchip: officially support HS200

[Sascha Hauer <s.hauer@pengutronix.de>]

"officially" is meant in the way that even with the SDHCI_QUIRK2_BROKEN_HS200
flag set the driver already does HS200 when the device tree mandates it.
Just remove the ineffective flag and wire up the execute_tuning hook.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mci/rockchip-dwcmshc-sdhci.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/mci/rockchip-dwcmshc-sdhci.c b/drivers/mci/rockchip-dwcmshc-sdhci.c
index 9ffd52e7e0..04ee528f07 100644
--- a/drivers/mci/rockchip-dwcmshc-sdhci.c
+++ b/drivers/mci/rockchip-dwcmshc-sdhci.c
@@ -300,11 +300,19 @@ static int rk_sdhci_send_cmd(struct mci_host *mci, struct mci_cmd *cmd)
 	return ret;
 }
 
+static int rk_sdhci_execute_tuning(struct mci_host *mci, u32 opcode)
+{
+	struct rk_sdhci_host *host = to_rk_sdhci_host(mci);
+
+	return sdhci_execute_tuning(&host->sdhci, opcode);
+}
+
 static const struct mci_ops rk_sdhci_ops = {
 	.send_cmd = rk_sdhci_send_cmd,
 	.set_ios = rk_sdhci_set_ios,
 	.init = rk_sdhci_init,
 	.card_present = rk_sdhci_card_present,
+	.execute_tuning = rk_sdhci_execute_tuning,
 };
 
 static int rk_sdhci_probe(struct device *dev)
@@ -351,9 +359,6 @@ static int rk_sdhci_probe(struct device *dev)
 
 	mci_of_parse(&host->mci);
 
-	/* HS200 not supported by this driver at the moment */
-	host->sdhci.quirks2 = SDHCI_QUIRK2_BROKEN_HS200;
-
 	sdhci_setup_host(&host->sdhci);
 
 	dev->priv = host;

-- 
2.47.3