From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH 1/6] mci: sdhci: rockchip: set hidspd before re-enabling the clock
Date: Thu, 7 May 2026 10:05:15 +0200 [thread overview]
Message-ID: <ef6babb6-3ba4-4917-99ee-4aab3f2d979d@pengutronix.de> (raw)
In-Reply-To: <20260507-rockchip-emmc-v1-1-5e8109e8059d@pengutronix.de>
On 5/7/26 9:02 AM, Sascha Hauer wrote:
> Linux changes the SDHCI_CTRL_HISPD bit while the clock is disabled. While
> I haven't observed any failures because of this, do the same as Linux to be
> on the safe side.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> drivers/mci/rockchip-dwcmshc-sdhci.c | 19 +++++++++----------
> 1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mci/rockchip-dwcmshc-sdhci.c b/drivers/mci/rockchip-dwcmshc-sdhci.c
> index 8e55190eb8..981f90af63 100644
> --- a/drivers/mci/rockchip-dwcmshc-sdhci.c
> +++ b/drivers/mci/rockchip-dwcmshc-sdhci.c
> @@ -146,6 +146,15 @@ static void rk_sdhci_set_clock(struct rk_sdhci_host *host, unsigned int clock)
>
> clk_set_rate(host->clks[CLK_CORE].clk, clock);
>
> + extra = sdhci_read8(&host->sdhci, SDHCI_HOST_CONTROL);
> +
> + if (clock > 26000000)
> + extra |= SDHCI_CTRL_HISPD;
> + else
> + extra &= ~SDHCI_CTRL_HISPD;
> +
> + sdhci_write8(&host->sdhci, SDHCI_HOST_CONTROL, extra);
> +
> sdhci_set_clock(&host->sdhci, clock, clk_get_rate(host->clks[CLK_CORE].clk));
>
> /* Disable cmd conflict check */
> @@ -212,7 +221,6 @@ static void rk_sdhci_set_clock(struct rk_sdhci_host *host, unsigned int clock)
> static void rk_sdhci_set_ios(struct mci_host *mci, struct mci_ios *ios)
> {
> struct rk_sdhci_host *host = to_rk_sdhci_host(mci);
> - u16 val;
>
> /* stop clock */
> sdhci_write16(&host->sdhci, SDHCI_CLOCK_CONTROL, 0);
> @@ -221,15 +229,6 @@ static void rk_sdhci_set_ios(struct mci_host *mci, struct mci_ios *ios)
> rk_sdhci_set_clock(host, ios->clock);
>
> sdhci_set_bus_width(&host->sdhci, ios->bus_width);
> -
> - val = sdhci_read8(&host->sdhci, SDHCI_HOST_CONTROL);
> -
> - if (ios->clock > 26000000)
> - val |= SDHCI_CTRL_HISPD;
> - else
> - val &= ~SDHCI_CTRL_HISPD;
> -
> - sdhci_write8(&host->sdhci, SDHCI_HOST_CONTROL, val);
> }
>
> static void print_error(struct rk_sdhci_host *host, int cmdidx)
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2026-05-07 8:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-07 7:02 [PATCH 0/6] mci: rockchip-dwcmshc: add HS200 support Sascha Hauer
2026-05-07 7:02 ` [PATCH 1/6] mci: sdhci: rockchip: set hidspd before re-enabling the clock Sascha Hauer
2026-05-07 8:05 ` Ahmad Fatoum [this message]
2026-05-07 7:02 ` [PATCH 2/6] mci: sdhci: rockchip: disable clock while setting DLL Sascha Hauer
2026-05-07 8:10 ` Ahmad Fatoum
2026-05-07 7:02 ` [PATCH 3/6] mci: sdhci: rockchip: Wait for transfer complete interrupt with MMC_RSP_BUSY cmd Sascha Hauer
2026-05-07 8:11 ` Ahmad Fatoum
2026-05-07 7:02 ` [PATCH 4/6] mci: sdhci: rockchip: Update pre-change delay for rockchip platform Sascha Hauer
2026-05-07 8:12 ` Ahmad Fatoum
2026-05-07 7:02 ` [PATCH 5/6] clk: composite: pick best parent for round_rate / set_rate Sascha Hauer
2026-05-07 7:02 ` [PATCH 6/6] mci: sdhci: rockchip: officially support HS200 Sascha Hauer
2026-05-07 8:15 ` Ahmad Fatoum
2026-05-07 8:36 ` Sascha Hauer
2026-05-07 7:47 ` [PATCH 0/6] mci: rockchip-dwcmshc: add HS200 support Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ef6babb6-3ba4-4917-99ee-4aab3f2d979d@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox