mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Barbier, Renaud" <>
To: Barebox List <>
Subject: NXP Layerscape
Date: Thu, 10 Jun 2021 13:49:03 +0000	[thread overview]
Message-ID: <> (raw)

I received a NXP  LS1046A-RDB

I built barebox for the LS1046A and got the image barebox-ls1046ardb-qspi.image.
I programmed the image in the alternative SPI bank as per NXP instructions:
=>	tftp $load_addr
=>	sf erase 0 +$filesize && sf write $load_addr 0 $filesize

Barebox does not boot.

I did notice that u-boot is at address 0x40100000 while the RCW is at 0x40000000.
My understanding is that barebox is one image and shall be programmed at offset 0 of the SPI (0x40000000)

At present I cannot connect my I.C.E. due a pin stuck in my MIPI connector.

Any return on experience is welcome.


barebox mailing list

             reply	other threads:[~2021-06-10 13:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-10 13:49 Barbier, Renaud [this message]
2021-06-10 14:09 ` Ahmad Fatoum
2021-06-10 17:08   ` Barbier, Renaud
     [not found]   ` <>
     [not found]     ` <>
     [not found]       ` <>
2021-06-10 16:35         ` Ahmad Fatoum
     [not found]           ` <>
2021-06-10 16:50             ` Ahmad Fatoum
     [not found]       ` <>
2021-06-11  8:29         ` Ahmad Fatoum
2021-06-14 15:16   ` Barbier, Renaud
2021-06-15  8:49     ` Sascha Hauer
2021-06-15 19:02       ` Barbier, Renaud

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \
    --subject='Re: NXP Layerscape' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox